Adelaide Specialist Coatings
Security System in Cockburn

It is acceptable that all materials and workmanship utilized in the manufacture of Vigil Antislip products are of the greatest quality, and furthermore that these products will be: If accurate measurements are given all Stair losings can be predrilled during manufacture. Mark the right position for the holes on the surface of the Stair Nosing. Measure the distance of the points marked from each side and the back of the Stair Nosing. Turn the Stair Nosing back over and replace it in the desired position. Occupied down from the top step, deposit the beginning Stair Nosing in the desired position and apply weight with one foot. Insert the end of a Te Screw onto the P3 driver and deposit the drilling last onto the Stair Nosing in the desired position. Measure the distance of the points marked from each side and from the back of the Stair Nosing. Grade: Ladder Rung Covers are only manufactured in Light industrial grade. This is also the method to install Metal Deck where access under the grating is not possible. Mark the correct position for the holes on the surface of each sheet of Metal Deck. Mark the top surface of the grating along the edges of each portion of Metal Deck so they can be returned to the equivalent store after drilling. Return the Metal Deck to the original positions and swivel each saddle around until they fit through the holes in the grating. When all saddles of the first sheet are through the grating and the sheet is in its original position, stand on the Metal Deck and insert the P3 driver (on the drill) into the head of one of the metal threads. Grade: Three standard grades exist in the range of Vigil Antislip Boardwalk commercial, industrial and offshore. The result is a closed-minded 10mm compressed base old for applications where the steel or vinyl foundations are not suitable. Like all other Vigil Antislip products, any drilling should be carried out from the underside of the Boardwalk through to the surface. Grade: Four standard grades exist in the range of vigil anti slip Vinyl Deck barefoot, commercial, industrial and offshore. Lay the Vinyl Deck on the floor in the desired position. When the total sheet is in place, apply pressure (not too much) to the edges to ensure that the adhesive covers the floor to the edges of the Vinyl Deck. Deck Mark can be applied onto any Vigil Antislip product. Like all other Vigil Antislip products, any drilling should be carried out from the underside of the Deckmark through to the surface. The range of commercial products are ideal for all areas originate to the public where the risks of slips and falls exist. The commercial range of Vigil Antislip products consist of Stair Treads and Safety Track.